A wireless network takes much less time to set up than a wired network, but that doesn’t mean it’s easier to set up. The location of a wireless router and the devices that connect to it can have a big effect on how well the network works. A wireless router needs to be put in a place where it can talk to other networked devices without interference, distance, or materials that block signals. When deciding where to put your wireless router, there are three main things to think about.
The easiest way to make sure that all the computers on your network get the best signal strength is to put the router in the middle of all the devices that will use it. Most of the time, a central location is also far from the outside walls of a house, which can block the signal. Try to put your router so that it is the same distance from each device that needs to connect.
Your wireless router and a lot of other devices use the same 2.4 GHz frequency. If these things are close to your router or computers, they can make the signal much weaker. Wireless phones that use the 2.4 GHz frequency can be very annoying. This problem can be fixed by getting wireless phones that work at 5.8 GHz. It is also known that microwaves can make things happen. If you notice that wireless data transfers slow down or stop when a microwave is running, try moving your router so that your microwave is not directly between the router and a receiving device. When deciding where to put your router, keep in mind that big metal things like filing cabinets can also block its signal.
Your network can also be affected by other routers that broadcast on the same channel or a channel next to it. If you know that a neighbor also has a router, try to set up your router and all of its devices as far away from your neighbor’s router as possible. You can also change the settings on your router so that you broadcast on a different channel that is at least two channels away from your neighbor.